
A plastic baler wrapper is only worth what it does in month nine, not on wrapping day. Every wrapped bale looks the same when it rolls off the turntable: smooth, white, tight. The difference between reliable wrap and unreliable wrap shows up much later, when a bale is opened in February and the outer layer is grey with mould, or when a stack that looked perfect in June has a ring of spoiled silage around every bale. By then, the cause is long out of sight and the feed is already lost.
A quick note on the term, because it causes confusion. In machinery catalogues, a “baler wrapper” usually means the machine itself, such as a combi baler wrapper that bales and wraps in one pass. On this page, “plastic baler wrapper” means the consumable: the stretch film, and the net wrap and twine that go with it. Silopak manufactures the plastics. Machines are built by our group company, and you can see the combi baler wrapper range at jummos.com.
This guide looks at reliability from the practical side: what each type of bale plastic does, how wrapped bales fail, what a single hole costs, and the wrapping and storage habits that let good film perform. It also corrects a few common ideas that lead farmers to buy the wrong product for the job.
What Plastic Bale Wrap Actually Does (and What It Does Not)
The most common misunderstanding about bale wrap is that it keeps moisture out. It does not, and it is not meant to. Silage and baleage are deliberately wet feeds, baled at roughly 40 to 60 percent moisture, and stretch film seals that moisture in. What the film keeps out is oxygen. Without oxygen, lactic acid bacteria ferment the plant sugars into acid, the pH falls, and the forage is preserved. With oxygen, yeasts and moulds take over, the bale heats, and the feed spoils from the outside in.
That distinction matters because it decides which product goes on which bale. Dry hay is preserved by being dry, at around 18 percent moisture or below for large round bales, and it needs to breathe. Sealing dry hay in airtight film traps whatever residual moisture is in the bale and gives it nowhere to go, which is a reliable way to grow mould inside a package that looks perfect from the outside. Dry hay and straw take bale net wrap or twine, plus elevated and covered storage. Our guide to hay moisture covers those thresholds in detail.
It also helps to be honest about what “airtight” means. Polyethylene film is not completely impermeable to oxygen; a small amount passes through every layer. That is exactly why layer count matters. Each extra layer slows oxygen diffusion further, and reliable preservation comes from the combination of enough layers, intact film and a dense, well-shaped bale rather than from any single sheet of plastic.
The Main Types of Plastic Used on Bales
“Plastic baler wrapper” covers several different products, each with a different job. Mixing them up is one of the easiest ways to waste money.
| Product | Material | Job on the Bale | Used For |
|---|---|---|---|
| Bale stretch film (silage wrap) | LLDPE, pre-stretched, with tack (cling) | Excludes oxygen so the bale can ferment | Silage, baleage, haylage |
| Bale net wrap | HDPE, knitted | Holds bale shape and density; sheds rain | All round bales, under film on silage bales |
| Baler twine | Polypropylene | Ties the bale; breathable | Small square, large square and some round bales |
| Binding film (film-on-film) | Polyethylene film | Replaces net wrap so the whole bale is one polymer | Silage bales on compatible balers |
Silage film is sometimes described as “HDPE wrap,” and that is worth correcting. Stretch film is made from LLDPE (linear low-density polyethylene) because it needs to stretch, cling to itself and recover without tearing. HDPE is stiffer and stronger in tension, which is why it is used for knitted net wrap. A reliable silage bale usually carries both, HDPE net for structure and LLDPE film for the seal, so the two should not be confused when comparing products or quotes.
Why Wrapped Bales Fail: The Common Causes
When a wrapped bale spoils, the film usually gets the blame. Sometimes that is fair, but more often the problem started earlier: too few layers, a wrapping delay, a handling puncture, or the wrong moisture at baling. Reliability is a chain, and the film is only one link.
| Failure Cause | What Happens | How to Prevent It |
|---|---|---|
| Too few film layers | More oxygen diffuses in; surface mould develops | Use six layers as the default; four only for short storage |
| Wrong pre-stretch | Over-stretch thins and weakens film; under-stretch reduces cling and wastes film | Set the wrapper to 50-70% pre-stretch and check it regularly |
| Delay between baling and wrapping | Bale heats; yeasts multiply before the seal goes on | Wrap within 2-3 hours; never leave beyond 12 hours |
| Handling damage | Grab and spike punctures let air into the bale | Wrap at the storage site; use a proper bale handler |
| Stubble and ground punctures | Sharp stalks pierce the film from below | Avoid coarse stubble; store on a clean, well-drained base |
| Birds and vermin | Pecked and gnawed holes, often on the top and sides | Store away from trees and hedges; net stacks; patch holes fast |
| Wrong forage moisture | Too wet: effluent and poor fermentation. Too dry: stemmy bales puncture film | Bale at roughly 40-60% moisture |
| UV breakdown | Film becomes brittle and splits in long outdoor storage | Use UV-stabilised film; plan to feed within about 12 months |
| Poor bale shape | Loose shoulders and air pockets under the film | Bale densely; use good net wrap with edge coverage |
Most of these are management issues rather than product faults, which is good news, because it puts reliability largely in the farmer’s or contractor’s hands. It also means that premium film wrapped a day late, with four layers, on coarse stubble, will not deliver premium results.
How Much Does One Hole Cost?
The best argument for careful wrapping and handling is the research on damaged bales. Teagasc, the Irish agriculture and food development authority, has studied what small holes do to wrapped silage, and the results are sobering. A single 3 mm hole per bale caused an 8 percent loss of edible silage. One 24 mm hole caused the loss of around a third of the bale. Six small holes of about 4 mm by 2 mm per bale left 26 percent of the bale surface covered in mould, compared with under 1 percent on undamaged bales.
Those numbers change how a damaged bale should be treated. A hole the size of a pencil tip is not cosmetic; it is a steady leak of oxygen into the feed for as long as the bale is stored. The sensible response is to inspect bales once they are in their final position, repair any damage straight away while it is still easy to see and reach, and check again periodically, particularly after windy weather or bird activity. Teagasc advises repairing damage immediately after the bale is placed.
The repair material matters too. University of Georgia forage guidance recommends UV-resistant repair tape made for silage film, not ordinary duct tape, which tends to lose adhesion and break down in sunlight. A patch that peels off in a month is no repair at all.
Layers, Pre-Stretch and Overlap: Getting the Wrapper Settings Right

Layer count is the setting with the biggest effect on reliability. Teagasc advises that six layers should be considered in all situations, and particularly for bales that will be handled several times; its Oak Park trials found lower mould levels with six layers than with four. University of Georgia guidance is similar, recommending four to six layers of UV-stabilised film, with four acceptable only when bales will be fed within about three months. For long storage, uneven bales or stemmy crops, six is the practical minimum.
Layer count has a size you can picture. According to Teagasc, the stretched polythene on a finished bale amounts to roughly 70 microns in total, compared with about 200 microns for a standard clamp cover sheet. That is a thin barrier for a feed that needs to keep for months, which explains why each layer and each hole matters so much. More layers than necessary, on the other hand, add cost and plastic waste without much extra benefit, so the goal is the right number, not the highest number.
Pre-stretch is the next setting to check. Bale film is designed to be stretched as it goes on, typically by 50 to 70 percent, which activates the cling, tightens the film around the bale and gives the coverage the film was designed for. Over-stretching makes each layer thinner and more likely to tear or puncture, while under-stretching reduces cling and uses more film per bale. Pre-stretch rollers wear and drift over a season, so it is worth checking the setting regularly against the wrapper handbook rather than assuming it is still right.
On individual bale wrappers, the usual method is a 50 percent overlap, so each turn covers half of the previous one and two turns build two layers. The standard “2+2+2” system builds six layers this way. Inline wrappers that wrap bales in a continuous tube use a different, smaller overlap and generally need more layers, plus extra film at the joints between bales. Follow the specific guidance for the type of wrapper you run.
Timing: Wrap Fast and Handle Gently
A bale that has been made but not yet wrapped is already respiring and heating, burning up the sugars that fermentation needs. Teagasc advises wrapping within two to three hours of baling, and University of Georgia guidance sets 12 hours as the outer limit. Combi baler wrappers, which bale and wrap in a single operation, solve this problem by design, which is one reason they have become popular with contractors in wet climates.
Handling is the second timing issue. Every time a wrapped bale is moved, there is a chance of puncture, so the fewer moves the better. Wrapping at the storage site, or very close to it, is the most effective way to cut handling damage and also removes the risk of stubble punctures in the field. Where bales must be moved after wrapping, Teagasc advises doing it immediately, preferably within hours, because bales left overnight in the field are more easily damaged when they are finally handled.
Use handling equipment designed for wrapped bales, such as soft-grip bale handlers, rather than spikes. A spike creates exactly the kind of hole the research above shows is so costly. Bales can be stored on their sides or on their flat ends, but Teagasc notes that side-stored bales often suffer less spoilage, because tipping bales onto their ends can damage the film on the base. If you do store on ends, tip carefully and examine the contact surface closely, since damage there is easy to miss once a bale is stacked.
Storing Wrapped Bales So the Film Can Do Its Job
Storage advice for wrapped silage is not the same as storage advice for dry hay, and the older version of this page mixed the two. For dry hay, a sunny, breezy site away from trees helps bales shed moisture, and research from Oklahoma State University Extension shows that exposed hay bales sitting on bare ground can lose up to the bottom 12 inches to moisture wicking up from the soil. That figure applies to net-wrapped or twine-tied dry hay. An intact, properly sealed silage bale does not wick moisture in the same way, because the film is a continuous barrier.
For wrapped silage bales, the priorities are different. The site should be level, firm and well drained, free of stubble, stones and sharp debris, and close to where the bales will be fed so they are not moved more than necessary. Keep stacks away from trees, hedges and long weeds, which harbour rodents and insects that in turn attract birds. Netting over stacks is a simple, effective defence where birds are a problem, and regular checks let you catch damage while it is still small.
Water and effluent need attention too. Very wet bales can release effluent, which is a serious pollutant. Teagasc advises keeping round bales at least 20 metres from a waterbody and stacking them no more than two high where there are no adequate effluent facilities, and some jurisdictions set their own legal limits; in England, for example, baled silage must be sealed in an impermeable membrane and stored at least 10 metres from inland or coastal waters. Our guide for UK net wrap buyers covers those rules in more detail.
What to Look for in Plastic Bale Wrap You Can Rely On
Once wrapping and storage are under control, product quality becomes the deciding factor. A reliable film stretches evenly without necking or tearing, clings consistently in both hot and cool weather, and holds its UV protection for the full storage period. Thickness should be consistent across the roll, since thin spots become weak spots once the film is stretched. Roll length should be guaranteed, because short rolls disrupt work in tight weather windows.
Price per roll can be misleading. The real cost of wrap is cost per well-preserved bale, and a cheaper film that tears on the wrapper or breaks down in sunlight before feeding can easily cost more in lost silage than it saved. Ask any supplier for written specifications, a UV guarantee, and samples to run through your own wrapper before committing to a season’s supply.
Recycling and the Environmental Question
The concern about plastic waste from bales is legitimate. Silage film, net wrap and twine are used in large volumes and do not break down harmlessly in soil. What has improved is the recycling route: LLDPE stretch film is a widely recycled polymer, and many regions now run collection schemes for farm plastics. The catch is that recycling works best when the plastic is clean, dry and separated by type, and film caked in soil and silage, or mixed with net wrap and twine, is far harder to recycle.
So the practical steps are straightforward. Remove film, net wrap and twine separately at feed-out, shake out as much forage as possible, store each type in its own dry bundle, and use an authorised collector rather than burning or burying plastic. Matching layer count to real need, instead of always adding extra film “to be safe,” also reduces the amount of plastic used. A bale that keeps perfectly also wastes no feed, which has its own environmental value.
Silopak Plastic Bale Wrap and Baling Consumables
Silopak, the trading name of Tsingtao Jummos Agricultural Technology Co., Ltd., has manufactured and exported baling consumables from Qingdao since 2011. Our LLDPE silage film is made from virgin LLDPE at 25 microns, in white, and supplied in 750 mm × 1,500 m, 500 mm × 1,800 m and 250 mm × 1,800 m rolls. It carries a 12-month UV guarantee and typically remains serviceable beyond 18 months in field conditions, provided the film is intact and the bales are stored as described above.
For the rest of the bale, we supply 100 percent virgin HDPE, UV-stabilised bale net wrap in 0.52 m, 1.05 m, 1.23 m and 1.25 m widths, in 2,000 m, 3,000 m and 3,600 m lengths with a guaranteed minimum of 2,000 m per roll, along with polypropylene baler twine. For hard-to-ferment crops such as legumes or late-cut grass, our SD-705 silage additive supports a faster pH drop and better aerobic stability at feed-out. Silopak makes the consumables only; balers and wrappers come from our group company at jummos.com. Contact our team for samples, specifications or container pricing ahead of the season.
Frequently Asked Questions about Plastic Baler Wrappers
Q: How many layers of plastic wrap does a silage bale need?
Six layers is the reliable default for most situations. Teagasc recommends considering six layers in all cases, especially for bales that will be handled more than once, and its trials found less mould with six layers than with four. University of Georgia guidance allows four layers only when bales will be fed within about three months. Stemmy crops, uneven bales and long storage periods all justify six layers, while going far beyond that adds cost and plastic waste without much extra benefit.
Q: Does plastic bale wrap keep moisture out of the bale?
No, and that is a common misunderstanding. Silage and baleage are made deliberately wet, at roughly 40 to 60 percent moisture, and the film seals that moisture in while keeping oxygen out. The absence of oxygen is what allows fermentation to preserve the feed. Dry hay is different: it is preserved by being dry and should be net wrapped or tied, not sealed in film, because film would trap residual moisture inside and encourage mould.
Q: What happens if a wrapped bale gets a small hole?
More than most people expect. Teagasc research found that a single 3 mm hole caused an 8 percent loss of edible silage, while one 24 mm hole caused the loss of about a third of the bale. Several small holes left more than a quarter of the bale surface mouldy. Inspect bales after placing them, repair damage immediately with UV-resistant silage repair tape rather than duct tape, and check stacks regularly for bird and vermin damage.
Q: How soon after baling should bales be wrapped?
As soon as possible. Teagasc advises wrapping within two to three hours of baling, and University of Georgia guidance sets 12 hours as the absolute limit. Unwrapped bales continue to respire and heat, using up the plant sugars that fermentation depends on and allowing yeasts to build up before the seal goes on. Combi baler wrappers, which bale and wrap in one pass, eliminate the delay entirely.
Q: How long can wrapped silage bales be stored?
With intact, UV-stabilised film and good storage, wrapped bales can keep their feed value for around a year, and good film can stay serviceable for longer. University of Georgia guidance notes that feed value holds for about 12 months if the plastic stays intact, but recommends feeding within nine months as good practice. Fermentation itself takes around six to eight weeks to complete, so bales are best left undisturbed during that period.
Reviewed by Sue Su, Marketing Director of Silopak, on 30 October 2026. Wrapper settings vary by machine, so treat the figures here as a starting point and confirm them against your wrapper’s handbook.
