
Anyone searching for feed mixer grinder manufacturers is usually trying to solve one of two different problems. Some want to grind their own grain and blend it with protein, minerals and vitamins into a meal for pigs, poultry or calves. Others want to chop hay and silage and mix them with concentrates into a total mixed ration (TMR) for dairy or beef cattle. Both jobs involve “grinding” and “mixing,” but they call for different machines, and buying the wrong one is an expensive mistake.
This guide explains the main types of livestock feed, the difference between a grinder mixer and a TMR mixer, the particle sizes that suit pigs, poultry and cattle, how to get an even mix, and what to look for when choosing equipment. It also corrects several points from the earlier version of this page, including the definition of roughage and some advice on grind size that applied to the wrong species.
The Three Types of Livestock Feed
Livestock feeds are usually grouped into roughages, concentrates and mixed or complete feeds. The earlier version of this page defined roughage as fibre from “fruits, vegetables, nuts, beans, grains” that passes “through the body unprocessed,” and linked to an article on human dietary fibre. That describes fibre in the human diet, not roughage in animal feeding, so it needs correcting.
| Feed Type | What It Is | Examples |
|---|---|---|
| Roughage (forage) | Bulky, high-fibre plant material, relatively low in energy per kg | Pasture, hay, silage, haylage, straw, crop residues |
| Energy concentrates | Low-fibre feeds rich in starch, sugar or fat | Maize, barley, wheat, sorghum, oats, molasses, fats and oils |
| Protein concentrates | Feeds high in crude protein, usually oilseed meals | Soybean meal, canola meal, cottonseed meal, distillers grains |
| Mixed or complete feeds | Rations blended to meet all of an animal’s nutrient needs | Compound pig and poultry feeds, TMR for cattle, calf starters |
Roughage is far from passing through “unprocessed.” In cattle, sheep and goats, fibre is fermented by microbes in the rumen, and that fermentation supplies much of the animal’s energy. Roughage also keeps the rumen working properly by stimulating chewing and the saliva that buffers rumen acid. Pigs and poultry, with simple stomachs, make much less use of fibre and rely mainly on concentrates. That difference is why their feeds, and the machines that make them, differ so much.
Grinder Mixer or TMR Mixer: Which Machine Do You Need?
The term “feed mixer grinder” is used loosely for several machines. The two you are most likely to be comparing are the grinder mixer and the TMR mixer.
| Feature | Grinder Mixer | TMR Mixer |
|---|---|---|
| How it works | Hammer mill grinds grain, which is augered into a mixing tank with other ingredients | Augers fitted with blades cut long forage and blend it with concentrates |
| Main ingredients | Whole grain, protein meals, minerals, premixes | Silage, hay, straw, concentrates, by-products, liquids |
| Product | Ground meal or mash | Total mixed ration |
| Best suited to | Pigs, poultry, calf and supplement feeds | Dairy cows, beef and feedlot cattle, sheep |
| Key quality measure | Particle size of the ground grain and mix uniformity | Forage chop length, mix uniformity and accurate weighing |
A grinder mixer suits farms that grow their own grain and feed animals with simple stomachs. A TMR mixer suits ruminant operations where forage makes up a large part of the ration and the aim is to give every animal a consistent mouthful containing forage, energy, protein and minerals in the right balance.
Getting the Grind Size Right for Each Species
Grind size, usually measured as the average particle diameter in microns (µm), affects digestibility, intake, animal health and how the feed flows through bins and feeders. The right size depends on the species, and the earlier version of this page mixed up some of the risks.
Pigs
Grinding grain more finely generally improves feed efficiency in pigs, because smaller particles give digestive enzymes more surface to work on. Mississippi State University Extension reports that grinding maize from 1,107 to 460 microns improved feed efficiency by 6 to 10 percent, and grinding sorghum from 1,217 to 539 microns improved it by 9 percent. It recommends a geometric mean diameter of about 500 to 800 microns, increasing as pigs grow, and cites Kansas State research suggesting maize should be ground to 700 to 800 microns for most pigs.
The limit is health. Extremely fine grinding is linked to stomach ulcers in pigs, and maize ground to 460 microns may increase ulcer incidence in finishing pigs. The earlier version of this page attributed ulcers to over-fine feed in poultry; the strong link is in pigs. Very fine, dusty feed can also reduce intake and cause feed to bridge in bins and feeders. As a guide, MSU notes that a 1/8 to 3/16 inch hammer mill screen gives roughly 600 to 800 microns.
Poultry
Poultry have a gizzard, a muscular organ that grinds feed mechanically, and some coarse material helps it develop and work well. Research summarised by Alabama Cooperative Extension (Auburn University) shows that young chicks do better on finer particles, while older broilers benefit from coarser material. Replacing half of the fine maize with coarse maize in grower and finisher diets raised average mash particle size to around 640 to 650 microns, improved feed efficiency and increased gizzard weight. Broilers from 14 to 42 days old could receive up to 9 percent whole maize without harming performance.
So the earlier advice to aim for a “medium” grind for poultry was broadly right, but the reason has more to do with gizzard function and feed efficiency than with ulcers. Excessively fine mash is also dusty, which is unpleasant for birds and workers alike.
Cattle and Other Ruminants
Ruminants need a different approach. Fine grinding makes grain starch ferment very rapidly in the rumen. The earlier version of this page said cattle should avoid fine grinds “since they will ferment inside,” but fermentation in the rumen is normal and necessary; the problem is fermentation that is too fast. Rapid starch fermentation drives rumen pH down and is a direct route to acidosis. For cattle, grain is usually cracked, coarsely rolled or steam-flaked rather than finely ground, and our guide to feed crops explains why coarse processing of barley is right and fine processing is risky.
Whole grain is not always wasted either. Barley and wheat pass through cattle largely undigested if fed whole, so they should be processed, while some feedlots feed whole maize to finishing cattle with acceptable results. The right choice depends on the grain and the class of stock.
Getting an Even Mix
The earlier version of this page described a real problem: in a vertical mixer, heavier ingredients such as ground maize can settle at the bottom while lighter ones stay on top. Ingredients that differ in particle size and density tend to separate, a process called segregation. A ration that is well formulated on paper but poorly mixed delivers too much of some nutrients to some animals and too little to others.
Mix uniformity can be measured. Kansas State University Research and Extension describes a standard test: add a marker such as salt, take ten samples from one batch at equal intervals during discharge, and calculate the coefficient of variation (CV) of the marker across the samples.
| Mixer CV | Rating | Suggested Action |
|---|---|---|
| Below 10% | Excellent | None |
| 10-15% | Good | Increase mixing time by 25-30% |
| 15-20% | Fair | Increase mixing time by 50%; check wear, overfilling and loading order |
| Above 20% | Poor | Several problems likely; consult the manufacturer or an adviser |
The common causes of poor mixing are practical ones. Overfilling creates dead spots where feed does not move; in one KSU example, 6 tons were loaded into a 5-ton mixer. Worn augers or ribbons lose their mixing action, and in another case replacing a worn outer ribbon fixed an uneven mix. Sticky ingredients such as molasses can build up on paddles and walls and lengthen the time needed to reach a good mix. Grinding maize first and then adding the smaller ingredients, as the earlier version of this page suggested, is sensible, but it works best alongside correct batch size, sound equipment and enough mixing time.
Using a TMR Mixer Well
For TMR mixers, loading order and mixing time matter as much as the machine itself. Troy Moen of Kuhn North America, writing in Progressive Dairy, recommends this loading sequence for vertical auger mixers: long-stem hay first, then water if needed, maize silage, grains and dry premixes, wet commodities, haylage, and finally liquids. Ingredients that need processing go in first, so the blades have time to cut them to the required length. He recommends mixing for 3 to 5 minutes at the rated speed after the last ingredient is added.
Batch size is part of the same picture. Vertical mixers need enough feed to cover the augers and do not work well with very small batches. For rations with a lot of round-bale forage, single-auger vertical mixers tend to process faster, while twin-auger models work better when the ration already includes some chopped forage.
Chop length deserves attention, because a TMR mixer can over-process as well as under-process. Long-stem hay that is not cut enough lets cows sort out the fibre and eat around it. Hay that is cut too short loses the “effective fibre” that keeps cows chewing and their rumen buffered. Checking the finished ration regularly with a particle separator box, and adjusting processing time accordingly, keeps the ration consistent.
Molasses, Oil and Other Additions
The earlier version of this page suggested adding molasses or oil “to keep the dust down and get a finer grind.” Molasses and fat do reduce dust and improve palatability, and many cattle and horse rations use them for exactly that. They do not make the grind finer; grind size is set by the hammer mill screen or the roller settings. Molasses also adds energy and sugar, but it can build up inside mixers, so equipment needs regular cleaning. The page also claimed soybean oil is always the cheapest option; oil prices vary by region and season, so compare current prices.
Another claim needs correcting. The earlier version said small grains could be added “to provide fiber” when hay is expensive, and that this would give meat and eggs “more taste and more omega 3s.” Grain is a concentrate, not a substitute for the fibre that ruminants get from forage; replacing hay with grain raises the risk of acidosis. Omega-3 enrichment of eggs and meat comes from specific ingredients such as flaxseed or fish oil, not from small grains in general. Soybean meal, also mentioned, is a protein concentrate rather than a fibre source.
Choosing Feed Mixing Equipment
The right machine depends on your animals, your ration and your farm layout. Questions worth answering before you buy include what share of the ration is forage, whether you feed whole bales, how many animals you feed per load, whether you need a mobile machine that delivers feed along the barn or a stationary one in a feed centre, and whether you have reliable mains power or rely on a tractor.
Accurate weighing is also worth insisting on. A ration is only as good as the amounts actually loaded, and an integrated weighing system with load cells lets the operator hit each ingredient target, repeat the same ration every day and track feed costs.
Our group company Jummos manufactures TMR mixers for cattle operations, including trailed TMR mixers from 5 to 30 m³ for tractors of 40 to 220 hp, and electric stationary TMR mixers from 5 to 48 m³ for feed centres with reliable power. All models have auger-mounted blades for cutting forage and integrated weighing sensors. To be clear about scope, Jummos makes TMR mixers rather than hammer-mill grinder mixers; if your main need is grinding grain for pigs or poultry, a dedicated hammer mill or grinder mixer is the better tool.
Better Silage Makes a Better TMR
A TMR mixer can only blend what goes into it. In most cattle rations, silage is the largest single ingredient, so its fermentation quality, dry matter and freedom from mould set the ceiling for the whole ration. Silage that has heated or moulded at the face loses energy and palatability, and mixing it into a TMR spreads the problem through every mouthful.
Silopak, the trading name of Tsingtao Jummos Agricultural Technology Co., Ltd., has manufactured and exported silage consumables from Qingdao since 2011. Our virgin LLDPE silage film seals bales and clamps, and our SD-705 silage additive supports a faster pH drop and better aerobic stability at feed-out. Our guide to grass silage moisture covers the dry matter targets that make silage easier to mix and more consistent in the ration. Contact our team for silage consumables, or Jummos for TMR mixers and other livestock machinery.
Frequently Asked Questions about Feed Mixer Grinders
Q: What is the difference between a grinder mixer and a TMR mixer?
A grinder mixer uses a hammer mill to grind grain and then blends it with protein, minerals and premixes in a mixing tank, producing a meal mainly for pigs, poultry and calves. A TMR mixer uses augers with blades to cut long forage such as hay and silage and blend it with concentrates into a total mixed ration for cattle and sheep. The right machine depends on whether your ration is grain-based or forage-based.
Q: What particle size should grain be ground to for pigs?
Mississippi State University Extension recommends about 500 to 800 microns, increasing as pigs grow, and cites Kansas State research suggesting 700 to 800 microns for maize in most pig diets. Finer grinding improves feed efficiency but very fine grinding, such as maize at 460 microns, may increase stomach ulcers in finishing pigs and can make feed dusty and prone to bridging in feeders.
Q: Should grain be finely ground for cattle?
No. Finely ground grain ferments very quickly in the rumen, lowering rumen pH and raising the risk of acidosis. For cattle, grain is usually cracked, coarsely rolled or steam-flaked instead. Barley and wheat should still be processed, since whole kernels pass through cattle largely undigested.
Q: How can I check whether my feed mixer mixes evenly?
Run a mixer test. Kansas State University describes adding a marker such as salt, taking ten samples from one batch at equal intervals during discharge, and calculating the coefficient of variation. A CV below 10 percent is excellent; above 20 percent is poor. Overfilling, worn augers or ribbons, buildup of sticky ingredients and too little mixing time are the usual causes of poor results.
Q: How long should a TMR be mixed?
A common recommendation, from Kuhn North America’s Troy Moen, is 3 to 5 minutes at the mixer’s rated speed after the last ingredient has been added. Long-stem hay should go in first so it has time to be cut to length. Mixing too little allows cows to sort the ration, while over-processing can cut forage too short and reduce effective fibre.
Q: Does Jummos make grinder mixers?
Jummos, Silopak’s group company, manufactures TMR mixers for cattle, in trailed models from 5 to 30 m³ and stationary electric models from 5 to 48 m³, all with forage-cutting blades and integrated weighing. It does not make hammer-mill grinder mixers. For grinding grain for pigs or poultry, a dedicated hammer mill or grinder mixer is the more suitable machine.
Reviewed by Sue Su, Marketing Director of Silopak, on 11 November 2026. Particle size and mixing guidance here come from university extension work; confirm settings for your own equipment and ration with your nutritionist.
